Environmental connections to public health >>
New Chemical Safety Rules Show Industry Influence Inside EPA
Chemical lobbyists are reportedly “satisfied” with and “optimistic” over the Environmental Protection Agency’s new rules for implementation of the nation’s primary chemical safety law.
Of course they are.
These days the chemical industry has good reason to be in high spirits. With Scott Pruitt at the helm, President Trump’s EPA has been a boon for the industry. The Trump administration has spent its first six months appointing people with deep industry ties to critical energy and environment positions.
Last week Trump announced his intention to nominate Michael Dourson to head the agency’s office of chemicals and pesticides. Dourson has a troubling history of working with industry to undercut chemical regulations. If the Senate rubber-stamps the nomination, he’ll be working with Nancy Beck, a former American Chemistry Council bigwig. We called Beck “the scariest Trump appointee you’ve never heard of” – at least unless Dourson is confirmed.
The chemical industry is finding sympathetic ears inside the EPA, especially when it comes to implementing the revised Toxic Substances Control Act, or TSCA, which was significantly overhauled last year. Particularly important are two rules dictating how the EPA will select and evaluate chemicals for safety.
The rules were proposed in January, shortly before Trump took office, and were met mostly with praise from public health and environmental advocates. But the American Chemistry Council, or ACC, the industry’s largest trade association, filed comments largely in opposition. The final rules, published last week in the Federal Register, have many significant pro-industry changes. Below are some that have the biggest implications for chemical safety.
Excludes important sources of chemical exposure from EPA’s safety evaluation
In response to the ACC and other chemical industry comments, the EPA gave itself discretion to exclude important sources of chemical exposure from safety assessments. This is important because people are exposed to chemicals in myriad ways.
Everyone gets some chemical exposures from consumer products, food, dust, drinking water and air pollution, but some people have unique exposure risks – such as workers who manufacture and process chemicals. Some chemical uses have largely been phased out, but people remain exposed through so-called legacy uses. Often, people are exposed to the same or similar chemicals from multiple sources. The law instructs the EPA to consider all these different sources of exposure and also the different populations likely affected when determining a chemical’s safety.
When it issued the proposed rule in January, the EPA acknowledged this requirement, stating that “a risk evaluation must encompass all manufacturing, processing, distribution in commerce, use and disposal activities ... that is to say all known, intended, reasonably foreseen activities.” The EPA said it did not interpret the statute to give it “license to choose among conditions of use.”
The ACC didn’t like this approach. In its comments, the ACC said looking at all those sources of exposure would “lead to an absurd result.” The ACC also included a laundry list of uses it wanted to be excluded from most risk evaluations. These included so-called non-TSCA chemical uses regulated under other laws or through other agencies, worker exposures regulated by the Occupational Safety and Health Administration, and low exposure uses.
When the EPA published its final rule, it reversed course, stating that after reevaluating the proposal it would allow risk evaluations to be conducted looking at only a subset of uses and exposures. As recommended by the ACC, the EPA also decided it had discretion to exclude certain uses regulated by other agencies, intentional misuses and low exposure uses. Most jarringly, the final rule generally excludes legacy uses and disposal of chemicals that are no longer on the market. This is a significant problem because uses are often phased out after they are identified as dangerous, but chemicals can stay in the environment for generations.
Puts greater emphasis on green-lighting chemicals rather than regulating them
The new TSCA requires that EPA designate chemicals as either low or high priority. “Low priority” is a de facto safety designation. High priority chemicals, on the other hand, might pose risks to public health or the environment, and the EPA must evaluate their safety.
Because low priority chemicals won’t undergo rigorous analysis or be regulated, the law sets a high bar. A chemical will only be designated as low priority if there is enough information to feel confident it is safe. Because this should rightly be a tough standard to meet, the EPA explained in the proposed rule that most chemicals would be considered high priority by default.
The ACC balked at this, saying that it would “undermine the ability of the Agency to make low priority designations” and encouraged the EPA to “consider creative solutions to improve the agency’s ability to make low priority designations.” The ACC asserted that the EPA “should make clear that the Agency has broad and flexible authority to designate chemicals as low priorities for risk evaluations.”
In the final rule, the EPA struck nearly all the references to a default, stating that several commenters felt the default designation “would be an unfair result for affected industries.” The EPA also added: “As a policy matter, EPA is committed to making Low-Priority designations on an ongoing basis beyond the statutory minimum,” and “in response to comments that EPA more explicitly recognize Low-Priority designations as part of the process, the final rule now includes a general objective for selecting candidates for Low-Priority [status].”
Lets the chemical industry limit EPA’s analysis of industry’s favorite chemicals
The new law allows the industry to request that the EPA assess particular chemicals. The law gives the EPA significant discretion as to how it will receive these requests and how it will decide whether to accept them.
In the rule as proposed in January, the EPA reasonably included a requirement that the requestor provide the agency with all information it would need to complete a rigorous and thorough safety evaluation. That would include information about all different uses and likely exposures. The EPA reserved the discretion to reject a request if the requestor did not provide enough information. The EPA also proposed to give preference to manufacturer requests with evidence of high risk.
The ACC really didn’t like this approach. It said the EPA’s proposed information requirements would “make it extraordinarily difficult, if not impossible, for a manufacturer to submit a request acceptable to EPA.” The ACC said manufacturers should be able to submit a request for only a small subset of uses of a chemical – not all uses and ways in which people might be exposed.
In the rule published yesterday, the EPA significantly rolled back its approach.
Specifically, the EPA decided that manufacturers would no longer have to submit information on all uses, but could make a request based on only the uses “that are of interest to the manufacturer.” The EPA would still have to do a full review of the chemical, but the burden would now be completely on the agency to identify the other uses and collect the relevant information. The EPA would have to meet the same strict deadlines, but without the benefit of the screening period it has for other chemicals, meaning the evaluation is less likely to be done well.
The EPA also backed down from its proposal to give preference to higher-risk requests. It will now accept manufacturer requests in the order received, likely making it easier for industry to get their favorite chemicals rubber-stamped quickly.
Eliminates early information gathering period
In the proposed rule, the EPA created an information-gathering period, called “pre-prioritization,” to seek and collect data on chemicals of concern. This period was designed to ensure the EPA had enough data early on to make informed decisions within the strict statutory deadlines.
In comments filed in March, the ACC said that this information-gathering period raised significant concerns. The ACC suggested a complicated tiered process for gathering information that would limit the EPA’s discretion and create bureaucratic obstacles to the agency demanding more from industry. In the final rule, the EPA eliminated the pre-prioritization period. It said it “expects to use a tiered approach to information gathering.”
Adopts industry’s preferred definitions for key terms
The final risk evaluation rule also included new definitions and changed others at the behest of groups like the ACC.
In January’s proposed rule, the EPA declined to codify definitions of several key terms like “best available science” and “weight of the evidence.” It expressed concern that doing so would “inhibit the flexibility of the agency to quickly adapt and implement changing science.” The EPA did, however, opt to include an expanded definition of a “potentially exposed or susceptible subpopulation” to make clear that it may include vulnerable populations not specifically named in the statute. EWG and other public health groups applauded this definition and considered it to be very health-protective.
The ACC was opposed to this approach. In its comments, the lobby group requested that “best available science,” “weight of the evidence” and other terms be defined. The ACC also opposed EPA’s expanded definition of a “potentially exposed or susceptible subpopulation.”
Once again, the ACC got its way. The final rule codified several definitions like “best available science” and “weight of the evidence,” as requested by the ACC. The “weight of the evidence” definition adopted by the EPA is exactly the definition requested by the ACC. The “best available science” definition includes many of the elements requested by the ACC. The EPA also scrapped the expanded, more health-protective definition of a “potentially exposed or susceptible subpopulation.”
The two final rules published last week represent a critical early test of the strength of the new law. That the EPA was willing to so significantly weaken these rules in favor of chemical industry demands does not bode well for public health. If Dourson is confirmed, the outlook is even bleaker. Unlike the ACC, we’re not feeling optimistic at all.